HOME > Product information > By Application > Fluiglide energy saving coating system
Use applications
Tank / container
pump
valve
pipe
Steel structure
Concrete
Coating method
brush
roller
airless
spray
pipe
spinning
pipe
sprayer
spatula,
scraper
＊Base treatment, application method, and film thickness may vary according to the environment and purpose.
＊There are more coating materials but we listed de most common use.

Fluiglide energy saving coating system

FLUIGLIDE E

Product information Coating method Temperature limit
Application
Immersed
100℃
Non-Immersed
ー
Product type Cold cured 100% solids epoxide, modified to give a high surface finish reducing roughness amplitude. Recommended DFT
Description For reduction of fluid friction in service conditions where light abrasion and/or solids are encountered. Minimum of 500 microns in two coat
Surcface preparation The surface should be prepared by grit blasting to ISO 8501-1 SA 3 or equivalent with an ideal profile of around 75 microns. SDS

FLUIGLIDE

Product information Coating method Temperature limit
Application
Immersed
90℃
Non-Immersed
ー
Product type A specially modified unsaturated ester resin, stabilised to reduce cold flow characteristics. Recommended DFT
Description Developed to reduce fluid friction, thus improving flow and efficiency.
This coating must only be used as a surface veil over a corrosion barrier layer.		 Base coat: 350-750 μm or more
Flulglide: Total 800 μm or more
Surcface preparation Cannot be applied directly to metal. Used as a top coat for base coats(Corroglass). SDS